ADLINK Technology cPCI-6860A Series Manual de usuario descargar pdf (Pagina 68)

60 Chassis Management Module

6.3 CMM Firmware Update

This section describes how to perform a firmware update for the

CMM. You will need the following:

X TFTPD32 (Windows TFTP server – freeware, available at

http://tftpd32.jounin.net/)

X New firmware binary file (complete.bin & complete.001)

Connect the remote console to the CMM’s LAN port with a cross-

over cable as described in Section 5.5 above.

Create new folder for firmware files:

Create a new folder (e.g. E:\RMC-SDK\Build\fwupdate) and then,

copy the new firmware (complete.bin & complete.001) into it. This

directory will be entered into the TFTP server’s parameter settings

below.

Install TFTP Server

Before the CMM firmware upgrade can be performed, it is neces-

sary to setup up a TFTP server on the remote console.

1. Power up the remote console.

2. Extract the downloaded TFTP files to a folder.

3. Run TFTPD32.exe.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 74 75 76

Sin comentarios

ADLINK Technology cPCI-6860A Series Manual de usuario Pagina 68