ADLINK Technology cPCI-6860A Series Manual de usuario descargar pdf (Pagina 20)

12 Getting Started

Figure 2-3: Latching the cPCI module handles securely.

5. Push inwards on the handles for final insertion. Ensure

that the buttons on the handles fully latch into position as

unless this is done the card is not correctly inserted. Fas-

ten the retaining screws at each end of the card (2 for

single slot cards, 4 for double slot cards).

6. To remove the module, undo the retaining screws, press

the release buttons (if necessary), and reverse steps 1

through 5 above.

CompactPCI PSU Installation/Removal Procedure

The cPCIS-3320 Series come with cPS-H325 PSUs pre-installed.

The removal and installation procedures for PSUs are the same

as for CompactPCI cards, except there is only one handle. To

replace a PSU module, refer to the figures and instructions below.

1. To remove the PSU module, undo the retaining screws

and unlatch the handle by pressing on the release but-

ton.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 75 76

Sin comentarios

ADLINK Technology cPCI-6860A Series Manual de usuario Pagina 20