ADLINK Technology CoreModule 730 Manual de usuario descargar pdf (Pagina 15)

Chapter 2 Product Overview

CoreModule 730 Reference Manual 11

Figure 2-6. Header, Connector, Socket Locations (Front View)

Jumper Header Definitions

Table 2-3 describes the jumper headers shown in Figure 2-6.

Note: All jumper headers use 0.079" (2mm) pin spacing.

NOTE Pin 1 is shown as a black pin (square or round) on vertical headers in all

illustrations. Black dots on right-angle headers indicate pin 2.

Table 2-3. Jumper Settings

Jumper # Installed Removed/Installed

JP2 – LVDS Voltage

Select

+3.3 Volts (Pins 1-2) Default +5 Volts (Pins 2-3)

JP3 – IDE Select Enable HDD master, CF slave (Pins 1-2)

Default

Enable HDD slave, CF master

(Pins 2-3)

JP4 – Compact Flash

Voltage Select

+5 Volts (Pins 1-2) +3.3 Volts (Pins 2-3) Default

JP8 – N/A For manufacturing only For manufacturing only

JP9 – Clear CMOS Normal (pins 1-2) Default Clear CMOS Setup (pins 2-3)

J25 J27

J26

JP8

JP3

JP4

JP9

J20

J17

J12

J13

J23

CM730_conn_front_b

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

Sin comentarios

ADLINK Technology CoreModule 730 Manual de usuario Pagina 15