ADLINK Technology CoreModule 730 Manual de usuario descargar pdf (Pagina 13)

Chapter 2 Product Overview

CoreModule 730 Reference Manual 9

Figure 2-4. Component Locations (Back View)

Header, Connector, and Socket Definitions

Table 2-2 describes the headers, connectors, and sockets shown in Figure 2-6. All I/O interfaces use 0.100"

(2.54mm) pitch unless otherwise indicated.

Table 2-2. Header, Connector, and Socket Descriptions

Reference # Access Description

J2 – Memory Front 200-pin, 0.024" (0.60mm) socket for DDR2 SDRAM SODIMM

J3 – Ethernet Front 10-pin, 0.079" (2mm), right-angle header for 10/100/1000BaseT

Gigabit Ethernet port

J5 – SUMIT A Front 52-pin, 0.025" (0.635mm) connector for out-going USB, PCIe,

Power, ACPI, SMBus, I2C, SPI, LPC, Serial, Keyboard, Mouse,

and Clock signals

J6 – SUMIT B Front 52-pin, 0.025" (0.635mm) connector for PCIe and Power

J7 – VGA Front 12-pin, 0.079" (2mm), right-angle, shrouded header for Video

Out

J8 – LVDS Front 20-pin, 0.079" (2mm), right-angle header for Video Out

J9 – IDE Front 44-pin, standard header for primary IDE interface

J10 – Compact Flash

(on back of the board;

see Figure 2-4)

Back 50-pin, 0.050" (1.27mm) socket for Type I or II Compact Flash

cards

J10

CM730_comp_back_b

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Sin comentarios

ADLINK Technology CoreModule 730 Manual de usuario Pagina 13