ADLINK Technology PCIe-FIW Series Manual de usuario descargar pdf (Pagina 33)

System Description 21

Matrix MXE-3000 Series

User’s Manual

2.4.1 Clear CMOS Jumper

If the MXE- 3000 fails to boot, this jumper clears the BIOS content

stored in CMOS and restores the default settings. Pin#1 and pin#2

of CN2 are jumped and the system restores to normal mode.

Table 2-8: Clear CMOS Jumper

2.4.2 SATA Connector

The MXE-3000 provides a SATA port supporting data transfer up

to 3.0 Gbit/s (300 MB/s). The SATA host controller supports a leg-

acy mode using I/O space and AHCI mode using memory space.

The SATA connector is compatible with a 2.5 inch hard disk drive

(HDD) or solid state disk (SSD). The HDD or SSD must be

installed into SATA connector with a HDD bracket. Please refer to

Section 3.1 for installation instructions for a 2.5 inch HDD or SSD.

2.4.3 USIM Port

Use of a 3.5G mini-PCIe module normally requires a SIM card to

support communication with a telecom operator. The MXE-3000

provides a USIM port connected to mini-PCIe connector. The SIM

card and 3.5G mini-PCIe module can be installed to facilitate 3.5G

communication.

2.4.4 Mini-PCIe Connector

The MXE-3000 features a mini-PCIe connector inside the chassis

to provide function expansion via installtion of a 3rd-party mini-

PCIe module complying with mini PCIe standard 1.1, such as a

WiFi module, 3.5G module or other, expanding functionality.

Normal Clear

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 73 74

Sin comentarios

ADLINK Technology PCIe-FIW Series Manual de usuario Pagina 33