ADLINK Technology ACL -6128 Guía de usuario descargar pdf (Pagina 16)

10 • Installation

2.4 Jumper and DIP Switch Description

The ACL-7120A channels and base addresses can be changed through

jumper settings and DIP switches on the card. The ACL-7120A is pre-

configured at the factory and should not need to be changed under normal

circumstances.

A jumper switch is closed or "shorted" with the plastic cap inserted over two

pins of the jumper. A jumper is open when the plastic cap inserted over one

or no pin(s) of the jumper.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Sin comentarios

ADLINK Technology ACL -6128 Guía de usuario Pagina 16